AccurateTemp Temperature Recognition Terminal

Integrates face recognition technology and non-contact temperature detection technology for simultaneous personnel access authority. Includes non-contact wrist temperature measurement with 0.18°F accuracy.

Operation SystemLinux
Face Recognition Acc’y Rate>99%
Face Recognition Time200ms
Face Capacity10,000 images
Card Capacity100,000 users
Storage Capacity4GB
Event Capacity30,000 (with images)
Measurement Range86° ~ 113°F (30° ~ 45℃)
Measurement Accuracy0.18°F (0.1℃)
Measurement Deviation≤0.54°F (≤0.3℃)
Measurement Distance1/3 ~ 1in (1~ 3cm)
Authentication ModeFace Whitelist∶ (1∶ N); Card: (1:N); Face + Body temperature
Door Opening MethodFace, Password, QR code, Card
Communication Mode10/100Mbps adaptive network port
Card TypeMifare 1 Card
User ManagementSupport user library addition, deletion, update
Record ManagementSupport local recording and real-time upload
InterfaceLAN×1, Wiegand Input×1, Wiegand Output×1, RS485×1, Alarm Input×2, Alarm Output×1, USB2.0×1, Lock×1, Door Contact ×1, Exit Button×1
Power / ConsumptionInput 12V±25% DC; <25W
ScreenTouch Screen, Size: 7 inch; Resolution: 600×1024
CameraDual Lens, 2MP, 1080P
Dimensions (L×W×H)5.3 x 1.3 x 12in (134 x 33 x305mm)
Working EnvironmentTerminal: -4° ~ 149°F (-20° ~ 65°C); (Digital Detection Module: 59° ~ 86°F (15° ~ 30°C); RH <95% (non-condensing)
Protection LevelBoth terminal and module: IP54
Application SituationIndoor, No wind
*This device is not medical grade and is not intended for diagnosis of disease
or other conditions or in the cure, mitigation, treatment, or prevention of
disease. This device is to be used to provide an initial body temperature
measurement for triage use only.

Get a Free Quote From ASI on AccurateTemp Temperature Measurement Tools

ASI is here to help customize a Temperature Scanner plan that works for you and your business. Call us now at 765-529-8288 or fill out the form and one of our Indiana Temperature Scanning technology specialists will contact you very soon!

  • This field is for validation purposes and should be left unchanged.